|
GENERAL
CONSTRUCTION
Fire rated wooden doors shutters are made of two
non-combustible boards sandwiching high-grade
proprietary insulation material and intumescent
compounds with teak wood edging all
around the shutter. An intumescent fire sealing
smoke strip is incorporated in the edging of shutters and
in frames on all sides except bottom. These are
faced with commercial/teak plywood to provide
aesthetic finish. Both single leaf and double
leaf doors in all sizes are available.
We
recommend the use of VIPER FR-880 fire retardant
primer and VIPER FRS -881 as the finishing fire
retardant Enamel paint for the door, which makes
the surface of the fire doors flame proof.
SPECIFICATIONS
OF 30 MINUTES RATED FULLY INSULATED WOODEN FIRE
AND SMOKE CHECK DOOR - PRODUCT CODE WDF
8101
PARTICULARS
Providing
and fixing doorframe of Seasoned hardwood / 2nd
class Teakwood/ Pressed steel frame * of 120mm *
70mm section (nominal) with heat activated
Intumescent fire seal strips of min 12mm * 4mm
(for smoke sealing) fixed on all the three sides
except the bottom. The frame being suitable for
mounting 30 minutes fire resistant shutters,
with one coat of anti-termite fire retardant
primer.
Providing
and fixing of non-metallic, 45mm thick, asbestos
free, FULLY INSULATED composite Fire & Smoke
check shutters of 30 minutes fire resistance
rating confirming to BS: 476 part-22, IS: 3614
part II, as per prototype tested & Certified
at CBRI Roorkee, duly approved by TAC (Traffic
Advisory Committee) suitable for mounting on
door frames as per item no.1. It comprises of
two non combustible boards each 12 mm thick,
sandwiching 20 mm thick Fire Resistant Filler,
faced with 3mm commercial ply facing on both
faces and teakwood lipping all around the
shutters with heat activated Intumescent Fire
Seal strip of size 12 mm * 4mm mounted in the
grooves in the shutter on all sides except
bottom with hinges and one coat of
Anti-termite fire retardant primer.
--
SINGLE LEAF
Rs. Per Sq. Mtr.
--
DOUBLE LEAF
Rs. Per Sq. Mtr.
FINISHING:
Painting the shutters with fire retardant paint
of “VIPER” Brand to provide Class-1 surface
spread of flame conforming to BS: 476 Part-7,
IS: 12777 is desired shade including cleaning
and preparation of surface.
SPECIFICATIONS
OF 60 MINUTES RATED FULLY INSULATED WOODEN FIRE
AND SMOKE CHECK DOOR
- PRODUCT CODE WDF 8102
PARTICULARS
Providing
and fixing doorframe of Seasoned hardwood / 2nd
class Teakwood/ Pressed steel frame * of 120mm *
70mm section (nominal) with heat activated
Intumescent fire seal strips of min 12mm * 4mm
(for smoke sealing) fixed on all the three sides
except the bottom. The frame being suitable for
mounting 60 minutes fire resistant shutters,
with one coat of anti-termite fire retardant
primer.
Providing
and fixing of non-metallic, 50mm thick, asbestos
free, FULLY INSULATED composite Fire & Smoke
check shutters of 60 minutes fire resistance
rating confirming to BS: 476 part-22, IS: 3614
part II, as per prototype tested & Certified
at CBRI Roorkee, duly approved by TAC (Traffic
Advisory Committee) suitable for mounting on
door frames as per item no.1. It comprises of
two non combustible boards each 12 mm thick,
sandwiching 20 mm thick Fire Resistant Filler,
faced with 3mm commercial ply facing on both
faces and teakwood lipping all around the
shutters with heat activated Intumescent Fire
Seal strip of size 12 mm * 4mm mounted in the
grooves in the shutter on all sides except
bottom with hinges and one coat of
Anti-termite fire retardant primer.
--
SINGLE LEAF
Rs. Per Sq. Mtr.
--
DOUBLE LEAF
Rs. Per Sq. Mtr.
FINISHING:
Painting the shutters with fire retardant paint
of “VIPER” Brand to provide Class-1 surface
spread of flame conforming to BS: 476 Part-7,
IS: 12777 is desired shade including cleaning
and preparation of surface.
SPECIFICATIONS OF 90 MINUTES RATED PARTIALLY
INSULATED WOODEN FIRE AND SMOKE CHECK DOOR
-
PRODUCT CODE WDF 8103
PARTICULARS
Providing
and fixing doorframe of Seasoned hardwood / 2nd
class Teakwood/ Pressed steel frame * of 120mm *
70mm section (nominal) with heat activated
Intumescent fire seal strips of min 12mm * 4mm
(for smoke sealing) fixed on all the three sides
except the bottom. The frame being suitable for
mounting 60 minutes fire resistant shutters,
with one coat of anti-termite fire retardant
primer.
Providing
and fixing of non-metallic, 50mm thick, asbestos
free, PARTIALLY INSULATED composite Fire & Smoke
check shutters of 60 minutes fire resistance
rating confirming to BS: 476 part-22, IS: 3614
part II, as per prototype tested & Certified
at CBRI Roorkee, duly approved by TAC (Traffic
Advisory Committee) suitable for mounting on
door frames as per item no.1. It comprises of
two non combustible boards each 12 mm thick,
sandwiching 20 mm thick Fire Resistant Filler,
faced with 3mm commercial ply facing on both
faces and teakwood lipping all around the
shutters with heat activated Intumescent Fire
Seal strip of size 12 mm * 4mm mounted in the
grooves in the shutter on all sides except
bottom with hinges and one coat of
Anti-termite fire retardant primer.
--
SINGLE LEAF
Rs. Per Sq. Mtr.
--
DOUBLE LEAF
Rs. Per Sq. Mtr.
FINISHING:
Painting the shutters with fire retardant paint
of “VIPER” Brand to provide Class-1 surface
spread of flame conforming to BS: 476 Part-7,
IS: 12777 is desired shade including cleaning
and preparation of surface.
SPECIFICATIONS OF 90 MINUTES RATED FULLY
INSULATED WOODEN FIRE AND SMOKE CHECK DOOR
-
PRODUCT CODE WDF 8104
PARTICULARS
Providing
and fixing doorframe of Seasoned hardwood / 2nd
class Teakwood/ Pressed steel frame * of 140mm *
65mm section (nominal) with heat activated
Intumescent fire seal strips of size 20mm * 4mm
(for smoke sealing) fixed on all the three sides
except the bottom. The frame being suitable for
mounting 90 minutes fire resistant shutters,
with one coat of anti-termite fire retardant
primer.
Providing
and fixing of non-metallic, 55mm thick, asbestos
free, FULLY INSULATED composite Fire & Smoke
check shutters of 90 minutes fire resistance
rating confirming to BS: 476 part-22, IS: 3614
part II, as per prototype tested & Certified
at CBRI Roorkee, suitable for mounting on door
frames as per item no.1. It comprises of two non
combustible boards each 12 mm thick, sandwiching
25 mm thick Fire Resistant Filler, faced with
3mm Commercial/ Teak ply facing on both faces and
Teakwood edging all around the shutters with
heat activated Intumescent Fire Seal strip of
size 20 mm * 4mm mounted in the grooves in the
shutter on all sides except bottom with hinges and one coat of Anti-termite fire
retardant primer.
--
SINGLE LEAF
Rs. Per Sq. Mtr.
--
DOUBLE LEAF
Rs. Per Sq. Mtr.
FINISHING:
Painting the shutters with fire retardant paint
of “VIPER” Brand to provide Class-1 surface
spread of flame conforming to BS: 476 Part-7,
IS: 12777 is desired shade including cleaning
and preparation of surface.
SPECIFICATIONS OF 120 MINUTES RATED FULLY
INSULATED WOODEN FIRE AND SMOKE CHECK DOOR -
PRODUCT CODE WDF 4101
PARTICULARS
Providing
and fixing doorframe of Seasoned hardwood / 2nd
class Teakwood/ Pressed steel frame * of 140mm *
65mm section (nominal) with heat activated
Intumescent fire seal strips of size 20mm * 4mm
(for smoke sealing) fixed on all the three sides
except the bottom. The frame being suitable for
mounting 120 minutes fire resistant shutters,
with one coat of anti-termite fire retardant
primer.
Providing
and fixing of non-metallic, 55mm thick, asbestos
free, FULLY INSULATED composite Fire & Smoke
check shutters of 120 minutes fire resistance
rating confirming to BS: 476 part-22, IS: 3614
part II, as per prototype tested & Certified
at CBRI Roorkee, suitable for mounting on door
frames as per item no.1. It comprises of two non
combustible boards each 12 mm thick, sandwiching
25 mm thick Fire Resistant Filler, faced with
3mm Commercial/ Teak ply facing on both faces and
Teakwood edging all around the shutters with
heat activated Intumescent Fire Seal strip of
size 20 mm * 4mm mounted in the grooves in the
shutter on all sides except bottom with hinges and one coat of Anti-termite fire
retardant primer.
--
SINGLE LEAF
Rs. Per Sq. Mtr.
--
DOUBLE LEAF
Rs. Per Sq. Mtr.
FINISHING:
Painting the shutters with fire retardant paint
of “VIPER” Brand to provide Class-1 surface
spread of flame conforming to BS: 476 Part-7,
IS: 12777 is desired shade including cleaning
and preparation of surface.
|
